Electronic Solid Density Meter for Plastic/Rubber Testing

The electronic solid density meter is widely used in the rubber and plastic, wire and cable, oil-impregnated bearings, composite materials, cosmetics, shoe materials, glass, hardware, and powder metallurgy industries.

Feature

• Capable of measuring irregular solid materials, such as blocks, granules, films, and floating objects.  
• Four compensation settings: Water temperature adjustment, measurement medium density, waterproof medium handling, and density upper/lower limit settings.  
• Solid densities >1 or <1 can be tested.  
• Offers two parameter settings: Solid density and density upper/lower limits.  
• Equipped with an RS-232 interface for connection to a printer or PC.  

Specification

Product Details

Accessories

Tips: How to Use a Solid Density Meter

• Set Up the Device
  • Connect the density meter to a power source and calibrate it using the standard weights provided.
  • Adjust the parameters such as water temperature, measurement medium density, and density limits if needed.
• Measure the Solid in Air
  • Place the solid sample on the measurement platform.
  • Record its weight in air by following the device instructions.
• Measure the Solid in Liquid
  • Fully submerge the sample in the liquid (e.g., water) using the hanging accessory or holder.
  • Record its weight in liquid as instructed by the meter.
• View and Save Results
• • The meter calculates and displays the density automatically.
  • Use the RS-232 interface to connect to a printer or PC for data recording if needed.