Single Phase DIN Rail Digital Energy Meter, LCD Display

Single phase DIN rail energy meter with 4-digit LCD display, low voltage current transformer (LVCT) connection is more compact, with lower installation cost and safer environment. The single-phase energy meter adopts intelligent metering chip, with high accuracy, small error, and no adjustment required for long-term use. The operation interface of the energy meter is simple and easy to use. It combines excellent performance and easy installation to provide cost-effective power monitoring applications.

Specification

Dimension (unit=mm)

Wiring

Tips: What should I pay attention to when installing an energy meter?

• Choose a suitable location: Install in a dry, well-ventilated place without corrosive gases, avoid direct sunlight and high temperature. Keep away from flammable and explosive items, and ensure that there is no strong magnetic field or strong electric field interference around.
• Wiring specifications: Use standard wires, and the cross-sectional area should meet the load requirements. Ensure that the wiring terminals are tight to avoid looseness or poor contact.
• Debugging and inspection: Confirm that the wiring is correct, without short circuit or open circuit. Observe whether the energy meter is running normally and whether the display is clear. Use professional equipment to detect the error of the energy meter to ensure that it meets the standards.
• Maintenance and care: Check the wiring and operating status regularly, and deal with abnormalities in time. Clean the energy meter regularly to prevent dust from affecting operation.