3 in 1 Heavy Duty Staple Gun

A 3 in 1 heavy duty staple gun is suitable for door/T/U shaped staples of which sizes are 8mm/10mm/12mm. An impact block on the front of the staple gun effectively buffers and extend service life. Made in high quality alloy steels, our best manual staple gun has good toughness and hardness that more assured to use.

Specification

Note: The sizes are approximate.

Three types of staples

Tips: How to Put Staples in a 3 in 1 Heavy Duty Staple Gun?

A staple gun is a hand tool for fastening woods, fabrics, cartons and furniture. A 3 in 1 heavy staple gun is suitable for door/T/U shaped staples, there are 6 steps to put staples in a staple gun.
1. You should press the switch of a staple gun with two fingers and move down to open the staple slot.
2. Remove the spring tap slot.
3. Put a staple strip into the slot, U shaped staples should be put in the middle of the slot, and T shaped staples should be put on the left or right of the slot.
4. Install the spring tap slot.
5. Push the spring tap slot into the staple gun.
6. Slightly tighten the spring tap slot.