14mm Thin Wall Spark Plug Socket

14mm 12-point thin wall spark plug socket with wall thickness 1.7mm, length 63mm, drive size 3/8".

Specification:

Tips: Disassembly steps of spark plug

1. To remove the spark plug, a wrench, an extension rod and a 6-point spark plug socket are required.
2. It can be disassembled after the engine has cooled down. First clean up the dust and oil on the ignition coil and its vicinity, then unplug the harness connector of the ignition coil, use a socket to unscrew the fixing bolt of the ignition coil.
3. Pull out the ignition coil. In some models, the ignition coil and the cylinder are sealed with rubber, which requires a little force when pulling out.
4. After removing the ignition coil, use a socket to loosen the spark plug. After unscrewing the spark plug to be disassembled, use a thin hose to blow off the dirt around the spark plug one by one, to prevent the dirt will fall into the combustion chamber.
5. Insert the previously removed ignition coil into the loosened spark plug and take out the spark plug.